Product Catalog
Browse our comprehensive selection of industrial-grade fasteners and hardware.
Zinc Alloy Anchor
Anchor size Outer thread Total length Head dia. 12*33 10 33 12 13*41 12 41 13 Advantage Quick and easy to install and use. Various end types are avaiable. Stronger than plastic anchor No need to pre-drill hole in the base material. Being suitable for light medium duty loading purpose Application Fixing bathroom, kitchen accessories, mirrors and photo frames Install curtain bars or signage indoor site Installing fixtures and objects for interior and room decoration engineering. Lighting Electrical installations Installation use screwdriver drive metal zinc alloy anchor plug into the base material, till the head is close to the base surface. Pass a self drilling screw through a guide hole in the fixture, insert it into the hole Fasten self drilling screw by screwdriver till be fixed fully.
Window Frame Anchor
Metal Window Frame Anchor: Fixes door and window frames to most building materials. All steel for strength and durability. window frame anchor are suitable for use in most solid base materials ranging from reinforceed concrete, concrete blocks, brickwork and natural stone. Plug Diameter 8mm,10mm Plug Length 80,100,120,140,160 Max Fixture Thickness 35, 40, 55, 60, 70, 80, 90, 115, Drill Hole Dia 8mm,10mm Min Hole 45mm,50mm
Tire Wire Wedge Anchor
Anchor Size Anchor Length Anchor Dia. Eye Dia M6*40 40 6 6.3 M6*50 50 6 6.3 M6*55 55 6 6.3 M6*60 60 6 6.3 Features Through fixing The wire hanger is especially design for overhead applications (pipes, lightings, ducts) The tie down hook is for general construction uses, overhead installations, fasten mesh fence to a wall The basic features are the same as the regular wedge anchor Applications Architectural facades Ornamental fixtures Railings Satellite dishes Signs Hard concrete block Hard natural stone Solid brick Non-cracked solid concrete Installation 1. Drill an appropriate size hole into base material2. Clean hole using a dust blower or compressed air.3. Insert the anchor into the hole.4. With a hammer or light mass, push down the anchor until the top of the threaded part .5. With the prongs of the hammer, lift the anchor to activate the locking mechanism.6. Pass the metal wire through the eyelet and fix it to the object.
Stone Undercut Anchor
Bolt+Clip+Sleeve+Washer+Nut Material SS304, SS316 Size M6*25,M6*30,M6*35;M8*30,M8*35 Advantages Stress-free fixing in natural stone Anchoring not visible from front of façade Static optimised position of anchor Higher collapse loads Fast and easy installation of reveal
Back Anchor
Bolt+Sleeve+Clip+Flat Washer+Spring Washer+Nut Material SS304, SS316 Size M6*25, M6*30, M6*35, M8*30, M8*35 Advantages Stress-free fixing in natural stone Anchoring not visible from front of façade Static optimised position of anchor Higher collapse loads Fast and easy installation of reveal
Spring Toggle Anchor
Size M3, M4,M5, M6, M8, M10, M12 Screw length 40mm-300mm Material Carbon steel & Stainless steel Finished Zinc plated, plain Advantage suitable for use in most cavity situations such as plasterboard, hollow blocks, hollow concrete planks and hollow clat pots Installation 1. Drill an appropriate size hole into the base material2. Insert the Spring Toggle through the object you need to affix.3. Fold the wings and insert them into the drilled hole.4. Screw clockwise until there is a strong resistance.
Snap Toggle Anchor
Size M5, M6, M8, M10, M12 Grip Range 10mm-240mm Material Carbon steel & Stainless steel Finished Zinc plated, plain Advantage Corrosion resistant Pre-install without the bolt to make handing easier Resuable in the same hole-remove the bolt without losing the anchor Installation Cinder block Concrete block Gypsum board Drywall Tile over drywall Plasterboard Composite panels Cement board Greenboard Plaster Stucco Fiberglass Plywood Steel plate Plastic Wood studs/beams Installation Drill appropriate size hole. Hold metal channel flat alongside plastic straps & slide channel through the hole. Hold ends of straps together between thumb & forefinger and pull toward you until channel rests behnd wall. Ratchet cap along straps with other hand until flange of cap is flush with wall. Place thumb between straps at wall. Push thumb side to side, snapping off straps level with flange of cap. Place item over flange. Insert bolt and tighten until snug against item, then stop. Use machine screw or bolt to match thread in metal channel.
Sharp type drywall hollow wall anchor
Anchor&Machine Screw Size M4, M5, M6 Screw Length 25-70mm Material Carbon Steel Finish Zinc Plated Advantages Greater holding power than nails or screws in hollow walls Fixtures can be removed or replaced without removing anchor Hollow wall drive anchors do not require predrilling drive into walls in seconds Medium to light duty applications such as wallboard, concrete block, plaster, plywood and hollow tiles
Hollow Wall Anchor
Anchor&Machine Screw Size M4, M5, M6 Screw Length 25-70mm Material Carbon Steel Finish Zinc Plated Advantages Greater holding power than nails or screws in hollow walls Fixtures can be removed or replaced without removing anchor Hollow wall drive anchors do not require predrilling drive into walls in seconds Medium to light duty applications such as wallboard, concrete block, plaster, plywood and hollow tiles
Nylon Framing Fixing anchor
Material &Color: Nylon PA Plastic & various color are avaiable Anchor Size Plug Dia. Plug length Screw Size 6*30 6 30 4.2*35 6*40 6 40 4.2*45 6*60 6 60 4.2*65 6*80 6 80 4.2*85 8*40 8 40 5*45 8*60 8 60 5*65 8*80 8 80 5*85 8*100 8 100 5*105 10*50 10 50 6*55 10*60 10 60 6*65 10*80 10 80 6*85 10*100 10 100 6*105 10*120 10 120 6*125 10*140 10 140 6*145 10*160 10 160 6*165 Advantage Being suitable for light madium duty loading purpose Quick and easy to install Application Timber Battens Door frames Wooden window frames Light Facade support Installation Drill correct diameter hole through fixture to correct depth in base material. Clean hole by brushing and blowing Insert frame fixing through fixture into base material and tighten screw
Nail in anchor
Size φ6*30, φ6*40, φ6*50 Material Carbon Steel, Stainless Steel Finish Zinc Plated, Plain Advantage Quick installation, easy to hit, good pull-out value Applications Ceiling hangers Suspended ceiling trim Electrical Boxes Canduit clips Signs Installation Drill a hole to the required diameter and depth Cleaning hole by bushing and blowing Position the fixing through the attachment and into the substrate Hammer wedge into anchor to secure
Lag Shield Anchor
Material : Zinc alloy Finish: Natural color Type: Short type(for hard substrate), Long type(soft substrate) Anchor Size Embedment Drill Dia 1/4" 1-1/2" 1/2" 5/16" 1-3/4" 1/2" 3/8" 2-1/2" 5/8" 1/2" 3" 3/4" 5/8" 3-1/2" 7/8" 3/4" 3-1/2" 1" Advantage Suitable for light medium duty loading purpose Rust prevention, corrosion resistant and environmental protection The short type is suitale for hard masonry substrate, the long type is for soft substrate. Used together with lag screw to expand and fix the objects, no precise drilling depth is required. Quick and easy to install. Applications Awnings Clotheslines Ornamental fixtures Railings Signs Installation Drill an appropriate size hole into the installation surface. Insert Lag Shield into the hole. Insert the screw through the object you need to afix and insert them into the Lag Shield. Using a wrench, turn clockwise there is a firm resistance.
Concrete Ceiling Anchor
Size φ6*40, φ6*65 Material Carbon Steel Finish Zinc Plated Advantage Quick installation, easy to hit, good pull-out value Applications Fixing ceiling Curtain wall Bracket Trash can Escalator and other steel structures Installation Drill a hole to the required diameter and depth Cleaning hole by bushing and blowing Position the fixing through the attachment and into the substrate Hammer wedge into anchor to secure
Christmas Tree Saw anchor With Wood Screw
Size M5x30,M6x32,M8x38,M8x60,10×60,10×80 Material Carbon Steel Finish Zinc Plated Advantages Ribbed internal geometry to guide the screw securely. External teeth ensure high load-bearing capacity. Suitable for wood and chipboard screws widens the range of applications. Suitable for • Concrete• Prestressed hollow-core concrete slabs• Natural stone with dense structure• Solid brick• Solid sand-lime brick• Solid block made from lightweight concrete• Aerated concrete• Solid panel made from gypsum• Vertically perforated brick• Perforated sand-lime brick• Hollow block made from lightweight concrete• Slabs made of perforated bricks• Hollow concrete blocks etc.
Chemical Anchor
Material of stud SS304, SS316,Carbon steel Size M8, M10, M12, M16, M20, M24 Threaded Rod 100-360mm Advantage Expansion-free fixing.Applicable close to free edge - and with small spacing.Anchorages can be designed in Expandet Calculation Software Usable in: In damp enviroments Under water In aggressive enviroments
Hit Anchor
Size M6(1/4"), M8(5/16"), M10(3/8"), M12(1/2"),M16(5/8"), M20(3/4") Length 45-190mm Material Stainless steel & Carbon Steel Finish Polished, Zinc Plated Advantage Applications Fixing ceiling Installation Using a hammer drill, drill a hole into the base material Insert the metal hit anchor through the fixture and into the hole drilled in the base material. With a hammer, carefully strike the nail of the metal hit anchor until the head is flush with the anchor body
Loose Bolt Shield Anchor
Thread Dia. (mm) M6, M8, M10, M12, M16 Screw Length 60-160mm Material Stainless Steel, Carbon Steel Finish Plain, Zinc Plated Applications Concrete Brickwork Stone Roller shutter doors Fire doors Steelwork Security grills Machinery Pipework/duct work supports
Projection Tam Shield Anchor
Size M6, M8, M10, M12,M16,M24 Length of bolt 65-300mm Material SS 316, SS 304, Carbon Steel Finish Plain, Zinc Plated Base Material concrete Masonary Brickwork Solid wall Stone Advantage Easily to complete with loose bolt, stud, eye bolt and hook bolt when installing Suitable for medium-heavy duty loading purpose. Retaining power can be removed easily to pull down the cone nut. Design double anti-rotation fins to prevent rotation in hole wall. Scales shape on surface to increase friction in the pre-drilled hole during installation A red plastic plug inserted for dust-proof Quick and easy to install and use Applications ▲Railings, special door industry, wall panels.▲ Installation of spacer signs, handrails, railings, shelves, and gates.▲ Installation of console grilles and fences and installation of heavy machinery.▲Pipeline installation engineering/pipe support.▲ Cables and towers.▲Installation of railing starter rods for structural expansion and rectification projects.▲Structural expansion and rectification project.▲ Curtain wall, cladding and precast concrete components. Installations Drill a hole in the base material to ensure the correct diameter and embedment depth. Use a nylon brush or high pressure air pump to remove all debris and dust. Insert tam shield anchor into the drilled hole until being flush with the surface. Pass a fastener through a guide hole in the fixture and vertically aligned with and close to a substrate hole. To tighten by tool until be fixed fully.
Loose Bolt Tam Shield Anchor
Anchor size Anchor Length Drill Dia Normal Hook Bolt Size M6 45 10 M6*50 M8 50 12 M8*55 M10 60 15 M10*65 M12 75 18 M12*80 Material: SS 316, SS 304, Carbon Steel Finish:Plain, Zinc Plated Being available to assemble loose bolt, stud, eye bolt and hook bolt Base Material concrete Masonary Brickwork Solid wall Stone Advantage Easily to complete with loose bolt, stud, eye bolt and hook bolt when installing Suitable for medium-heavy duty loading purpose. Retaining power can be removed easily to pull down the cone nut. Design double anti-rotation fins to prevent rotation in hole wall. Scales shape on surface to increase friction in the pre-drilled hole during installation A red plastic plug inserted for dust-proof Quick and easy to install and use Applications ▲Railings, special door industry, wall panels.▲ Installation of spacer signs, handrails, railings, shelves, and gates.▲ Installation of console grilles and fences and installation of heavy machinery.▲Pipeline installation engineering/pipe support.▲ Cables and towers.▲Installation of railing starter rods for structural expansion and rectification projects.▲Structural expansion and rectification project.▲ Curtain wall, cladding and precast concrete components. Installations Drill a hole in the base material to ensure the correct diameter and embedment depth. Use a nylon brush or high pressure air pump to remove all debris and dust. Insert tam shield anchor into the drilled hole until being flush with the surface. Pass a fastener through a guide hole in the fixture and vertically aligned with and close to a substrate hole. To tighten by tool until be fixed fully.
Hook Bolt Tam Shield Anchor
Anchor size Anchor Length Drill Dia Normal Hook Bolt Size M6 45 10 M6*50 M8 50 12 M8*55 M10 60 15 M10*65 M12 75 18 M12*80 Material: SS 316, SS 304, Carbon Steel Finish:Plain, Zinc Plated Being available to assemble loose bolt, stud, eye bolt and hook bolt Base Material concrete Masonary Brickwork Solid wall Stone Advantage Easily to complete with loose bolt, stud, eye bolt and hook bolt when installing Suitable for medium-heavy duty loading purpose. Retaining power can be removed easily to pull down the cone nut. Design double anti-rotation fins to prevent rotation in hole wall. Scales shape on surface to increase friction in the pre-drilled hole during installation A red plastic plug inserted for dust-proof Quick and easy to install and use Applications ▲Railings, special door industry, wall panels.▲ Installation of spacer signs, handrails, railings, shelves, and gates.▲ Installation of console grilles and fences and installation of heavy machinery.▲Pipeline installation engineering/pipe support.▲ Cables and towers.▲Installation of railing starter rods for structural expansion and rectification projects.▲Structural expansion and rectification project.▲ Curtain wall, cladding and precast concrete components. Installations Drill a hole in the base material to ensure the correct diameter and embedment depth. Use a nylon brush or high pressure air pump to remove all debris and dust. Insert tam shield anchor into the drilled hole until being flush with the surface. Pass a fastener through a guide hole in the fixture and vertically aligned with and close to a substrate hole. To tighten by tool until be fixed fully.
Eye Bolt Tam Shield Anchor
Anchor size Anchor Length Drill Dia Normal Hook Bolt Size M6 45 10 M6*50 M8 50 12 M8*55 M10 60 15 M10*65 M12 75 18 M12*80 Material: SS 316, SS 304, Carbon Steel Finish:Plain, Zinc Plated Being available to assemble loose bolt, stud, eye bolt and hook bolt Base Material concrete Masonary Brickwork Solid wall Stone Advantage Easily to complete with loose bolt, stud, eye bolt and hook bolt when installing Suitable for medium-heavy duty loading purpose. Retaining power can be removed easily to pull down the cone nut. Design double anti-rotation fins to prevent rotation in hole wall. Scales shape on surface to increase friction in the pre-drilled hole during installation A red plastic plug inserted for dust-proof Quick and easy to install and use Applications ▲Railings, special door industry, wall panels.▲ Installation of spacer signs, handrails, railings, shelves, and gates.▲ Installation of console grilles and fences and installation of heavy machinery.▲Pipeline installation engineering/pipe support.▲ Cables and towers.▲Installation of railing starter rods for structural expansion and rectification projects.▲Structural expansion and rectification project.▲ Curtain wall, cladding and precast concrete components. Installations Drill a hole in the base material to ensure the correct diameter and embedment depth. Use a nylon brush or high pressure air pump to remove all debris and dust. Insert tam shield anchor into the drilled hole until being flush with the surface. Pass a fastener through a guide hole in the fixture and vertically aligned with and close to a substrate hole. To tighten by tool until be fixed fully.
Tam Shield Anchor
Size M6x45, M8x50, M10x60, M12x75 Material SS 316, SS 304, Carbon Steel Finish Plain, Zinc Plated Being available to assemble loose bolt, stud, eye bolt and hook bolt Base Material concrete Masonary Brickwork Solid wall Stone Advantage Easily to complete with loose bolt, stud, eye bolt and hook bolt when installing Suitable for medium-heavy duty loading purpose. Retaining power can be removed easily to pull down the cone nut. Design double anti-rotation fins to prevent rotation in hole wall. Scales shape on surface to increase friction in the pre-drilled hole during installation A red plastic plug inserted for dust-proof Quick and easy to install and use Applications ▲Railings, special door industry, wall panels.▲ Installation of spacer signs, handrails, railings, shelves, and gates.▲ Installation of console grilles and fences and installation of heavy machinery.▲Pipeline installation engineering/pipe support.▲ Cables and towers.▲Installation of railing starter rods for structural expansion and rectification projects.▲Structural expansion and rectification project.▲ Curtain wall, cladding and precast concrete components. Installations Drill a hole in the base material to ensure the correct diameter and embedment depth. Use a nylon brush or high pressure air pump to remove all debris and dust. Insert tam shield anchor into the drilled hole until being flush with the surface. Pass a fastener through a guide hole in the fixture and vertically aligned with and close to a substrate hole. To tighten by tool until be fixed fully.
Gravity Toggle Anchor
Size M5, M6, M8, M10, M12 Screw length 40mm-300mm Material Carbon steel & Stainless steel Finished Zinc plated, plain Advantage suitable for use in most cavity situations such as plasterboard, hollow blocks, hollow concrete planks and hollow clat pots Installation 1. Drill an appropriate size hole into the base material2. Insert the Spring Toggle through the object you need to affix.3. Fold the wings and insert them into the drilled hole.4. Screw clockwise until there is a strong resistance.
Drop In Anchor With Lip
Material SS304, SS316,Carbon steel, Brass Size M6, M8, M10, M12, M16, M20 Advantages Flush surface finish means fixtures can be relocated easily Material Versatile , usable with standard metric bolts sets Screws or studding Quick and easy to install NO thread damage when hammering the Drop in Anchor into the drilled hole StainlesS steel version available for CorrOSIve enVironments No flared end tor easy Setting In greater depth Allows for shalloW embedment Without sacritICing perormance Hammer set anchor with internal thread tor prepositioned Installation Suitable for all screWS or studs with metriC threads Installation
Drop In Anchor
Material SS304, SS316,Carbon steel, Brass Size M6, M8, M10, M12, M16, M20 Advantages Flush surface finish means fixtures can be relocated easily Material Versatile , usable with standard metric bolts sets Screws or studding Quick and easy to install NO thread damage when hammering the Drop in Anchor into the drilled hole StainlesS steel version available for CorrOSIve enVironments No flared end tor easy Setting In greater depth Allows for shalloW embedment Without sacritICing perormance Hammer set anchor with internal thread tor prepositioned Installation Suitable for all screWS or studs with metriC threads Installation
Wedge Anchor
Features through fixing Medium to heavy duty loads Torque controlled expansion supplied pre-assembled for rapid installation Installation Position fixture and drill correct diameter hole to correct depth Clean hole by brushing and blowing to remove all dust and drilling debris insert assembled anchor through fixture into concrete tighten with torque wrench to recommended torque